The CMC Doctor has no afilliation with the Original Equipment Manufactures (OEM) listed on this page. If you prefer OEM parts please contact your local distributor and/or the OEM directly.


Computer Upgrades

 

Will your computer run the latest version of Microsoft Windows?
Need a computer that will support that old motion controller?
Call us! We have a solution!

 
Eclipse™ Computer  (for Galil DMC-1030 controllers, CMCs with a S/N ending in 255 or lower.)


Minimum Configuration
Mid-Tower Case w 300W PS (Black)
P4-2.8 GHz 800 MHz FSB 1MB Cache Hyper-threading
Intel Extreme Graphics SVGA 8MB On Board Video
1 GB DDR SDRAM (4GB Max)
10/100/1000 Gigabit Ethernet
2 - ISA slots for your Motion Controller
5 - PCI Slots
6 USB port (2-front, 4-rear), 8 serial, 1 parallel
2 PS/2 Ports (KBD/Mouse)
80 GB Hard Drive
CDRW 52x24x52 (Black)
PS/2 Mouse & KDB (Black)
Windows XP

Price: $1,000.00 plus S& H

click here to order

This package is assembles by The CMC Doctor from off-the-shelf parts aquired from various sources.
A similar package may be available from the the Original Equipment Manufacturer (OEM).
If you prefer OEM parts please contact the OEM or your local distributor directly.

Fletcher® F-6100™ Computer   (for MEI 104/DSP motion controller - Adapter Kit required)
 Gunnar 1001-2001 Computer   (for Turbo-Step 45D motion controller)
 MatWRITER™ Computer   (for Galil DMC-1040 & DMC-1050 motion controllers)
 Wizard 5000 Computer   (for Cyberpack Co. BIM-3-PC motion controller)


Minimum Configuration
Mid-Tower Case w 300W PS (Black)
P4-2.8 GHz 800 MHz FSB 1MB Cache Hyper-threading
Intel Extreme Graphics SVGA 8MB On Board Video
1 GB DDR SDRAM (4GB Max)
10/100/1000 Gigabit Ethernet
2 - ISA slots for your Motion Controller
5 - PCI Slots
6 USB port (2-front, 4-rear), 8 serial, 1 parallel
2 PS/2 Ports (KBD/Mouse)
80 GB Hard Drive
CDRW 52x24x52 (Black)
PS/2 Mouse & KDB (Black)
Windows 98SE

Price: $1,000.00 plus S& H

click here to order

This package is assembles by The CMC Doctor from off-the-shelf parts aquired from various sources.
A similar package may be available from the the Original Equipment Manufacturer (OEM).
If you prefer OEM parts please contact the OEM or your local distributor directly.

Fletcher® F-6100™ Adapter Kit  
 (for mounting the MEI 104/DSP motion controller in an external computer)


Kit Contents
1 - PC104/ISA adapter pcb
2 - flat ribbon cables with connectors
2 - external moulded SCSI cables, 6ft
2 - SCSI cable adapter w/ PC slot cover
2 - SCSI cable adapter w/ enclosure cover
1 - New lower front panel, Black Box (blank)
1 - New lower rear panel, Black Box (cable interface)

Price: $300.00 plus S& H
 Call for availability.

click here to order

This package is assembles by The CMC Doctor from off-the-shelf parts aquired from various sources.
A similar package may be available from the the Original Equipment Manufacturer (OEM).
If you prefer OEM parts please contact the OEM or your local distributor directly.

 

Equipment Upgrades

 

Don’t like the way your current CMC works?
Need an obsolete part?
Want a custom accessory to give you an edge on the competition?
Call us! We will create a solution for your problem!

 
Eclipse™ Classic Cylinder Upgrade

 

Improved cutting response times.
Less maintenance, improved performance.
Supplied with clean dry air this cylinder should last 1,000,000 cycles.

Price: $195.00 plus S& H

click here to order

This package contains parts made exclusively for The CMC Doctor and/or off-the-shelf parts that are
directly interchangeable with similar parts supplied by the Original Equipment Manufacturer (OEM).
If you prefer OEM parts please contact the OEM or your local distributor directly.

Eclipse™ Pro Y-axis Carriage

 

Fits Eclipse™ Pro-Cutting Foot
Improves cutting performance over sheet-steel carriages used on Early Eclipse™ Classics.
Includes 5-piece hinge set which improves rigidity over the original 3-piece design.

Price: $150.00 plus S& H

click here to order

This package contains parts made exclusively for The CMC Doctor and/or off-the-shelf parts that are
directly interchangeable with similar parts supplied by the Original Equipment Manufacturer (OEM).
If you prefer OEM parts please contact the OEM or your local distributor directly.

 

Accessories

 
Heavy Duty Foot Switch

 

For hands free operation of the
mat clamps. Connection cable
with plugs included.

Price: $120.00 plus S& H

click here to order

Clamp Rulers - 32x40

 

Adhesive backed rulers.
Black rule on silver background.
48" Horizontal x 36" Vertical.
Trim to length after installation.

Price: $25.00 plus S& H

click here to order

Clamp Rulers - 40x32

 

Adhesive backed rulers.
Black rule on silver background.
36" Horizontal x 48" Vertical.
Trim to length after installation.

Price: $25.00 plus S& H

click here to order

Clamp Rulers - 40x60

 

Adhesive backed rulers.
Black rule on silver background.
72" Horizontal x 48" Vertical.
Trim to length after installation.

Price: $29.00 plus S& H

click here to order

 

Quiet Air Compressors

Panther 5024AL

    Product Specs    

Warranty 2 Years
Noise Level 40 db/A
Power Req. 115/220 VAC
50-60 Hz
HP 0.5
Output 2.1 CFM
Duty Cycle 50%
Max Pressure 120 PSI
Tank Size 6.3 Gal
Ship Size 17"x17"x29"
Ship Weight 66 lbs

   

CALL
 plus S&H

  click here to order

Panther 50TC

    Product Specs    

Warranty 2 Years
Noise Level 40 db/A
Power Req. 115/220 VAC
50-60 Hz
HP 0.5
Output 2.1 CFM
Duty Cycle 50%
Max Pressure 120 PSI
Tank Size 0.93 Gal
Ship Size 12"x15"x15"
Ship Weight 47 lbs

   

CALL
 plus S&H

  click here to order

Sil-Air 50/24

    Product Specs    

Warranty 1 Year
Noise Level 40 db/A
Power Req. 115/220 VAC
50-60 Hz
HP 0.5
Output 2.1 CFM
Duty Cycle 50%
Max Pressure 120 PSI
Tank Size 6.3 Gal
Ship Size 17"x17"x29"
Ship Weight 66 lbs

   

CALL
 plus S&H

  click here to order

Sil-Air 50TC

    Product Specs    

Warranty 1 Year
Noise Level 40 db/A
Power Req. 115/220 VAC
50-60 Hz
HP 0.5
Output 2.1 CFM
Duty Cycle 50%
Max Pressure 120 PSI
Tank Size 0.93 Gal
Ship Size 12"x15"x15"
Ship Weight 47 lbs

   

CALL
 plus S&H

  click here to order

 

The Tool Center


MatWRITER™
Bit Sharpening
System

    Contents    

2 - Grinders
2 - Tool Stops
1 - Bit Collet
1 - Collet Block, Square
1 - Collet Nut
1 - Collet Nut Wrench
1 - Alignment Tool
1 - Bottle Diamond Spray
1 - Grinding Wheel
1 - Finishing Wheel

   

CALL
 plus S&H

  click here to order

This package is assembles by The CMC Doctor from off-the-shelf parts aquired from various sources.
A similar package may be available from the the Original Equipment Manufacturer (OEM).
If you prefer OEM parts please contact the OEM or your local distributor directly.

 

The CMC Doctor has no afilliation with the Original Equipment Manufactures (OEM) listed on this page. If you prefer OEM parts please contact your local distributor and/or the OEM directly.



Eclipse is a trademark of Wizard International, Inc.
FLETCHER is a trademark of The Fletcher-Terry Company
FLETCHER 6100 is a trademark of The Fletcher-Terry Company
F-6100 is a trademark of The Fletcher-Terry Company
FLETCHER 2000 is a trademark of The Fletcher-Terry Company
FLETCHER 2100 is a trademark of The Fletcher-Terry Company
MATMATE is a trademark of The Fletcher-Terry Company
Gunnar is a trademark of Weissenberger AG
MatWRITER is a trademark of Kaibab Industries
Speed-Mat is a trademark of Speed-Mat, Inc.
Valiani is a trademark of Valiani SRL
Wizard is a trademark of Wizard International, Inc.
Zund is a trademark of Zünd Systemtechnik AG